The Economical Dock Door Alternative.

The Bantam roll door is an economical fabric door alternative to high maintenance overhead dock doors. With the same crisp lines and fabric selection as our popular PredaDoor®, it accommodates most dock applications.

The Bantam® door is ideal for interior or exterior applications with low to moderate traffic. With manual operation standard via a pull-chain hoist, the Bantam can also be motorized for push button opening and closing if desired.

Takes a Hit

Quick-Set,™ Break-Away™ tabs allow bottom bar to be
reset without tools in just seconds, virtually eliminating door downtime.

Simple Operation

Chain hoist and speed governor make for easy manual door operation.

Minimal Space

Only 6-1/4 inches of side clearance and 3-3/4 inches of side column projection required.

Wind Resistance

Integral panel connecting ribs allows quick, inexpensive replacement of all panel sections and provides resistance to wind and negative pressure.

Visibility

Provided by 17 inch by 17 inch replaceable PVC window which is standard. Full-width vision panel is optional.

Standard Manual Operation

Chain hoist and speed governor for easy operation.

Optional Powered Drive System

Overhead door operator available with a single open/close/stop push button station.

Full Visibility

Optional full-width PVC window.

Specifications

Subject to change

Model

Rytec® Bantam®

Standard Size

Up to 10 feet wide by 10 feet high.

Door Panel

Standard options include replaceable vinyl sections, extruded aluminum connecting rib(s), and one 17 inch by 17 inch replaceable PVC window. Options include 2-ply Rilon,™ USDA compliant material, screen material and full-width vision panels.

Side Frames

Fully bolt-together, anodized aluminum construction with full-height weatherseal to seal against panel material.

Manual Drive System

Opening and closing is manually operated by use of chain hoist and speed governor.

Optional Powered Drive System

Overhead door operator available with a single open/close/stop push button station. Motor horsepower and voltage selected to meet specific application. Includes a pneumatic reversing edge.

Bottom Bar

Quick-Set™, Break-Away™ extruded aluminum bottom bar releases in either direction without damage to the door. Vinyl seal on bottom edge for tight seal to floor. Sliding locks on bottom bar standard. Bottom bar preassembled on doors at factory.