Economical Interior Door with
Full Vision and Tight Seal.

A superior performing alternative to impact doors and strip curtains, the Clear-Seal is a full-vision, high-speed roll door for interior applications.

In addition to the safety of top-to-bottom visibility at the threshold, it offers all the benefits associated with high-speed doors – improved traffic flow and efficiency, reduced energy and maintenance costs, and indeed, the ability to take a hit. In short, the Clear-Seal is a viable, economical option for obtaining high speed door performance, with a tight seal, for interior openings up to 10 feet wide by 10 feet high.

Threshold Safety

With its fullheight, clear PVC panels and dual electric photo eyes, the Clear-Seal provides great visibility and added safety for interior applications where fork trucks and other equipment are either crossing the threshold in both directions, crossing the door’s traffic lane, or both.

Fast

Opens at up to 50 inches per second for improved traffic flow.

Takes A Hit

Quick-Set,™ Break-Away™ tabs allow bottom bar to be
reset without tools in just seconds, virtually eliminating door downtime.

No Coil Cord

Retractable power cord within the bottom bar and side
column eliminates the need for an external coil cord.

Low Profile

Side columns are only 4 inches wide, with 4 inches of
projection. Fits virtually anywhere.

Crisp Lines

Extruded aluminum side columns and optional aluminum
hood provide an attractive frame for the door’s alternating clear and brightly-colored panels.

CONTROLLER

System 3® Door Controller (Standard)

Incorporating state-of-the-art motion control technology, the System 3 controller combines the flexibility and performance of AC Drive technology with the ease and precision of digital control.

ACTIVATORS

The System 3 door controller is designed to operate with many different types of activators, depending on the application and operating environment.

Floor Induction Loop (Optional)

Activation loops embedded into the concrete on both sides of the doorway substantially reduce operator error in opening and closing doors. With no moving or exposed parts, floor induction loops are extremely reliable.

Motion Detectors (Optional)

Motion detectors operate on microwave technology. They detect pedestrian and vehicle motion in a prescribed area. The detector sends a signal to the controller to open the door.

Presence Sensors (Optional)

Presence sensors detect pedestrians and vehicles in the area of the detector. Motion is not necessary. The sensor signals the controller to open the door.

Radio Controls (Optional)

A radio control consists of a transmitter and a receiver. The vehicle operator activates the transmitter which sends a signal to the receiver. The receiver then signals the controller to open the door.

Push Button (Optional)

The push button is generally used with pedestrian traffic and is typically mounted on the wall near the door. Pedestrians push the button as they approach the door, which signals the door to open.

Pull Cords (Optional)

The pull cords are switches mounted on the ceiling. Pedestrians and vehicle operators pull the cord as they approach the door, signaling the controller to open the door. Vehicle operators generally have to slow down to pull the cord.

Multiple Activators (Optional)

The System 3 door controller permits many activators to be used in multiple combinations. For example, a door can be opened by forklifts through induction floor loops and by pedestrians through a push button, each with independent closing times to allow for pedestrians passing through the door.

Optional Hood Assembly

aluminum hood covers roll and motor

Drive System Options

Single speed, two speed, and variable speed AC drive are available-- depending on the application.

Airlocks

In airlock applications, one controller with various activators permits doors to be interconnected so only one door is open at a time.

Related Documents:

Clear-Seal Installation Manual
Clear-Seal Control Panel Supplement
Clear-Seal Information Sheet
Clear-Seal Drawings (zipped)
Clear-Seal Specification

Specifications

Subject to change

Model

Rytec® Clear-Seal®

Standard Size

Up to 10 feet wide by 10 feet high.

Door Panel

Clear 1.5 mm PVC material with 0.65 mm dark blue vinyl strips and nylon wind rollers standard. Panel stability up to 0.15 inches of differential water pressure (equivalent to 10 mph wind pressure).

Side Frames

Anodized aluminum side columns with removable cover.

Bottom Bar

Quick-Set,™ Break-Away™ extruded aluminum bottom bar releases in either direction without damage to the door. Standard dual cut-off switches shut off motor when bottom bar is impacted. Electric reversing edge is standard. No exposed junction box on bottom bar. No external electric cord. Retractable cord is mounted in the side column. Vinyl loop seal hugs floor contour for tight seal. Bottom bar preassembled on doors at factory.

Optional Hood Assembly

Aluminum roll and motor cover

Drive System

Single speed, two speed and variable speed AC drive are available. The multiple drive systems provide flexibility to accommodate any application.

Travel Speed

Opens at up to 50 inches per second.

Electrical Controls

Solid State, UL®-Listed.

Warranty

One year limited warranty on materials and workmanship.